• DrZzs Pixel Pro V4 Top Wired
  • DrZzs Pixel Pro V4 with Wires
  • DrZzs Pixel Pro V4 Wired
  • DrZzs Pixel Pro V4 Angled
  • DrZzs Pixel Pro V4 Side
  • DrZzs Pixel Pro V4
  • DrZzs Pixel Pro V4 Back
  • DrZzs Pixel Pro V4 JST
  • DrZzs Pixel Pro V4 RGB Pixel Lights
  • DrZzs Pixel Pro V4
  • DrZzs Pixel Pro V4 Top Wired
  • DrZzs Pixel Pro V4 with Wires
  • DrZzs Pixel Pro V4 Wired
  • DrZzs Pixel Pro V4 Angled
  • DrZzs Pixel Pro V4 Side
  • DrZzs Pixel Pro V4
  • DrZzs Pixel Pro V4 Back
  • DrZzs Pixel Pro V4 JST
  • DrZzs Pixel Pro V4 RGB Pixel Lights
  • DrZzs Pixel Pro V4

DrZzs Pixel Pro v4

In Stock

£29.99

£24.99 excl. VAT

Order before 12pm Mon-Fri for same day dispatch

Free delivery on orders over £75.

Delivery Options 〉

DrZzs Pixel Pro v4

  • Automatically Works with 12v or 5v (even 24v) – no Jumper! (your Power Supply voltage still needs to match your LED voltage)
  • Reverse polarity protection: incase you mix up + & –
  • ESP32 – for better performance using e1.31 & xLights
  • WLED preloaded: no need to manually flash
  • GPIO-36 available for microphone (to use with Audio-Reactive WLED)
  • GPIO-0 button for easy on/off toggle and long press / double press Macros (You’ll have to set “button pin” to “0” in WLED 0.12 and beyond)


This is a little RGB-led controller of DrZzs own design. It is similar to the DigUno but it is also a bit different.

It’s main features are:

  • Logic Level Shifter – So it can be placed far from the LEDs
  • Automatically Works with 12v or 5v (even 24v) – no Jumper! (your Power Supply voltage still needs to match your LED voltage)
  • Reverse polarity protection: incase you mix up + & –
  • ESP32 – for better performance using e1.31 & xLights
  • WLED preloaded: no need to manually flash
  • GPIO-36 available for microphone (to use with Audio-Reactive WLED)
  • GPIO-0 button for easy on/off toggle and long press / double press Macros (You’ll have to set “button pin” to “0” in WLED 0.12 and beyond)
  • Wiring is simple
    • + from the power supply and + going to the LEDs go on the + terminal
    • – from the power supply and – going to the LEDs go on the – terminal
    • Data to the LEDs goes on the terminal between + & –

Differences from the DigUno:

  • There is no Fuse (LED power doesn’t pass through the circuit board)
  • Only 1 output pin
  • ESP32 integrated into the circuit board
  • USB-C for programming (do not connect power and USB-C at the same time)
  • All components are surface mount
  • Flat/Compact Design

WLED is distributed under the MIT License

Copyright (c) 2016 Christian Schwinne

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Brand Information

People also viewed

Why Proptimise ?

Tried and Tested

We only sell products which have been tried and tested by our team in our own installation.

Detail 〉

Flexible Delivery

We offer a range of flexible delivery options, including free standard delivery on orders over £75.

Delivery options 〉

Prebuy Bulk Discounts

Happy to wait? Get the biggest savings by Prebuying your bulk order from our next delivery of stock.

Learn More 〉

Free Support

Need a helping hand getting started with your purchase? Get free setup support from our team.

Product support 〉
×